SANWA Digital Multimeter DC/AC up to 600V CD770 1 unit

Catalogue number: CD770 Features: ●Double molding makes the outer circumference of the instrument elastomer resin resistant to shocks. ●Includes data hold, range hold and relative value measurement functions. ●CE compliant. ●The outer circumference of the main body is made of elastomer resistant to shocks. ●Includes current measurement terminals with safety caps. ●Large, easy-to-read characters on the LCD display. ●Cancelable auto power-off function that operates after approximately 30 minutes. ●Frequency measurement (supports zero-cross signals only, input resistance approximately 2kΩ). ●Capacitor capacity measurement (cannot measure aluminum electrolytic capacitors with large leakage currents). Applications: ●For equipment maintenance. ●For research and development. ●For electronic work. ●For checking the performance of electronic components. Specifications: ● DC voltage (V): 600 ● AC voltage (V): 600 ● DC current (A): 0.4 ● AC current (A): 0.4 ● Resistance (Ω): 40M ● DC current (mA): 400 ● AC current (mA): 400 ● Detection method: Average value rectification (MEAN) ● Continuity check: Pronounced at 0 to 85 Ω (±45 Ω) Open circuit voltage: Approximately 0.4V●Calibration documents: Supported●Power supply (V): 2 x AA manganese dry batteries (R6P) (included)●Width (mm): 82●Depth (mm): 44●Height (mm): 166●Power supply: 2 x AA manganese dry batteries (R6P) (included)●Continuous use time (h): Approximately 400 hours●Maximum display (counts): 4000●Capacitor (F): 100μ●Frequency (Hz): 100k●Diode test: Open circuit voltage 1.5V●Maximum display: 4000 counts●Double molding makes the outer circumference made of impact-resistant elastomer●Frequency measurement compatible with zero-cross signals is possible●CE standard product●Battery life 400 hours●Test leads can be fixed and stored on the back of the main unit. ●Fuse specifications: Φ5×20mm 0.5A/250V 1.5kA ceramic tube (F1176) Set contents/accessories: ●Test lead (TL-21a) ●Instruction manual Caution: ●Do not use if the main unit or test lead is damaged. ●Do not hold the test pin side of the test probe from the flange during measurement. ●Connect the ground side of the test lead (black test lead) first, then connect the live side (red test lead). When disconnecting, remove the live side first. ●Do not switch to another function or range or plug the test lead plug into another measurement terminal during measurement. ●Use fuses of the specified shape and rating.