SANWA Contact Motor Phase Inspector KS3 1 unit

Catalogue number: KS3 Features: ●Can check the rotation direction of three-phase motors and detect the phase of three-phase AC. ●Can determine the direction of rotation by manually rotating the shaft of a three-phase motor. ●Can be fixed to a distribution board, etc. with the magnet on the back of the main unit. ●Safety standard: IEC61010-1 CAT.［［Ｒ３］］ 500V compliant. ●Induced voltage range of motor rotation: AC approx. 1V or more Applications: ●For determining the rotation direction of three-phase motors. ●For determining the phase sequence and missing phases in three-phase circuits. Specifications: ● Operating voltage range: AC75-500V● Calibration documents: Not supported● Power supply (V): 1 x stacked 9V dry battery (6LR61) (included)● Width (mm): 72● Depth (mm): 38● Height (mm): 128● Power supply: 1 x stacked 9V dry battery (6LR61) (included)● Compliant with international safety standard CAT.[3]500V● Detects the direction of rotation of a three-phase motor and detects phase loss (non-contact type) of three-phase AC voltage● Can be confirmed by rotating the motor shaft 1/2 by hand Set contents/accessories: ● Alligator clip (3 colors), test lead (3 colors), carrying case, instruction manual● Instruction manual● Test lead TL-KS● Carrying pouch C-KS2● ​​Alligator clip CL-KS Caution: ● To avoid the risk of electric shock, use on circuits of 500 V or less. ● Do not measure above the maximum rated voltage. ● If the line voltage is 30 V or less, the live line lamp will not light up. ●Even if there is an open phase, the CW or CCW lamp will light up, but operation cannot be specified. Please check that all three live lamps are lit. ●Cannot be used with single-phase three-wire.