SANWA AC-only true RMS digital clamp meter DCM60R 1 unit

Catalog number: DCM60R Features: ●A wide range of AC current from 0.1 to 600A, allowing measurement of AC currents up to 600A. ●Complies with international safety standard CAT.[3]600V ●True RMS measurement method ●Also capable of measuring AC voltage, resistance, and continuity checks ●Data hold function Applications: ●For maintenance of power equipment such as automobiles. ●For electrical work. Specifications: ●AC current (A): 600 ●AC voltage (V): 600 ●Resistance (Ω): 199.9 ●Detection method: True RMS rectification ●Calibration documents: True RMS rectification ●Power supply (V): 2 AAA alkaline batteries (R03) (included) ●Width (mm): 50 ●Depth (mm): 29 ●Height (mm): 187 ●Power supply: 2 AAA alkaline batteries (R03) (included) ●Width (mm): 50 ●Depth (mm): 29 ●Height (mm): 187 ●Continuous use time (h): 250 hours ●Maximum measurement conductor diameter (mm): 30 ●Maximum display (counts): 1999 ●Clamp diameter (mm): 25 ●Continuity: Buzzer sounds at approximately 100 Ω or less Open circuit voltage: Approx. 1.0V●Complies with international safety standard CAT.[3]300V●Battery life: 250 hours●Maximum display: 1999 countsSet contents/accessories:●Instruction manual●Carrying case C-DCM60L●Test lead TL-21aCaution:●This is a low-voltage clamp meter. Do not use on circuits with a voltage to ground exceeding 600V.●Do not switch to other functions during measurement.●When connecting or disconnecting from a live conductor, wear insulating protective gear such as electrical rubber gloves.●Do not input signals that exceed the maximum rated input value.●During measurement, do not hold the test pin side of the test probe beyond the barrier or the clamp sensor beyond the barrier.