SANWA USB-linked tap TAP-RE2UN 1 piece

Catalog number: TAP-RE2UN Features: ●A power strip that can turn peripheral devices on and off by detecting the power flowing through the USB port. ●Box-shaped with 8 outlets that prevent the power from coming out. ●Connects to a computer with a USB port and can be turned on and off in conjunction with the main unit's ON/OFF. *Complies with USB 1.1 and 2.0 standards. ●Equipped with 3 outlets that are always powered and are not linked to the ON/OFF of the computer. ●Simply insert the USB cable of the USB current-sensing USB-linked tap into the USB port of the computer to catch the current flowing through the computer and turn the current of the peripheral devices connected to the linked outlets on and off. ●The plug can be locked with the anti-pullout outlet. ●Comes with a terminal for connecting an earth wire. ●Comes with a 3P to 2P conversion adapter. Specifications: ●Width (mm): 284 ●Depth (mm): 100 ●Height (mm): 40 ●Rated capacity: 15A, 125V (up to 1500W) ●Plug: 3P (with 3P → 2P conversion adapter) ●Outlet: 3P, 8 outlets (1 PC, 4 linked outlets, 3 non-linked outlets) ●Power cord length (m): 2 ●Body size (mm): W284 x D100 x H40 ●Country of origin: Japan Note: ●Turn on the power of the PC. When the OA tap is energized, the power of the peripheral devices will be turned on. If connected via a USB hub, the PC will recognize the USB hub before the power of the peripheral devices is turned on. ●Shut down the PC and turn off the power. The power of the peripheral devices will be turned off after a few seconds. ●This product cannot be used as a normal tap. The outlet will not be energized unless a power signal is detected from the USB port. This product was developed for PCs. It cannot be used for other purposes. ●USB current 50020μA or less. <How to connect> 1. Make sure that the computer is turned off.