SHINOHARA Thin-type Splash-proof Gallery GTS-45W 1 unit

Catalog number: GTS-45W Features: ●The slim design has achieved a significant reduction in the depth dimension. ●Filter maintenance work can be done from the front side. ●Please use it as a ventilation opening part for distribution boards, control boards, operation panels, cubicles, etc. ●A significant reduction in the depth dimension has been achieved while maintaining the same protection class (IP45) as conventional products. Space saving is achieved. ●Due to the effect of the inner parts, the filter surface is not easily exposed to rain and wind, so the ventilation capacity of the filter is not reduced by a water film even in rainy weather. ●Filter maintenance work can be done from the front side. ●A 160mm square fan can be installed on the back side of the GTS-45W. (When installing a fan, use it for exhaust.) Uses: ●For panels installed outdoors where it is exposed to harsh conditions such as rain and wind. Specifications: ●Shape: 2-row●Height (mm): 250●Width (mm): 500●Depth (mm): 16.5●Panel cut dimensions Height x Width (mm): 210 x 460●Drilling pitch Height x Width (mm): Pitch 113.5 from corner to center x Pitch 119 from corner to front center, Pitch 119.5 from front center to center (φ7 x 12)●Color: Beige (5Y7/1)●Width (mm): 500●Front opening area (cm2): 250●Thickness (mm): Outer louver: 1.5, Filter case: 1.2●Outer louver mounting screw: Pan flat W/Nylon W built-in M5●Bell spring nut: M6●Selling unit (units): 1●Outer louver, inner louver, dust filter, filter case, waterproof gasket●RoHS compliant●Maintenance front●No fan Material/Finish: Outer louver: SUS304 Inner louver: Polypropylene (Flame retardant: UL94 V-0) Dust filter: Non-woven fabric filter Note: For installation, mounting holes are required in addition to panel cuts. Please contact us separately.