SKF Ball Bearing Forced Extraction Puller Kit TMMD 100 TMMD 100 1 piece

Catalogue number: TMMD 100 Features: ● Allows removal of deep groove ball bearings while still mounted in the housing and shaft. ● Suitable for use in both blind housing (bearings while still mounted in the housing and shaft) and shaft applications (bearings while removed from the housing). ● The puller is designed to fit precisely into the bearing raceways, providing good grip and thereby allowing high removal forces. ● Each puller arm is spring loaded for easy installation. ● The jaws are designed for easy insertion. ● The hex head on the spindle is designed to prevent the spanner from slipping off the spindle during removal. ● Can also be used to extract sealed bearings from blind housings with the seals removed. ● Supplied in a sturdy carry case. Applications: ● For removal of deep groove ball bearings. ● For removal of bearings while still mounted in the shaft or housing. Specifications: ● Reach of claws (mm): 135-170 ● Claw tip thickness (mm): Compatible with the groove of deep groove ball bearings ● Compatible bearing outer diameter (mm): ^ ● Compatible bearing inner diameter (mm): 10-100 ● Set contents (pieces): 6 ● Push screw hex size (mm): 19, 24 ^ ● Easy removal of bearings while still attached to the shaft and housing ● Compatible with 71 types of SKF deep groove ball bearings with shaft diameters of 10 to 100 mm ● Type that hooks the claws onto the raceway surface of deep groove ball bearings and pulls them out Set contents/accessories: ● 6 types of puller arms (3 of each), pulling spindle and 2 nuts, handle, carry case