SUPER Vacuum Chuck Size: 200 x 250 x 65mm Maximum suction force: 1.31kN SVA2025 1 unit

Catalog number: SVA2025 Features: ●Since a vacuum ejector is used, a dedicated vacuum pump is not required. ●It can be used simply by inserting the one-touch fitting tube from the compressor in the factory. ●Since it is adsorbed by air, it can be used with non-magnetic materials such as stainless steel, aluminum, and resin. ●The adsorption force can be adjusted with a pressure reducing valve, and by adjusting it, air consumption can be reduced by 20%. ●When it is OFF, a small amount of air is constantly released from the vacuum hole, preventing foreign matter from entering the circuit. ●A base mounting hole is provided so that it can be installed when used in parallel. ●Comes with a side plate for positioning and preventing the workpiece from shifting. Applications: ●The workpiece is instantly adsorbed and fixed with air from the compressor. ●200×250 Specifications: ●Suction surface (mm): 200×250 ●Width (mm): 200 ●Depth (mm): 250 ●Height (mm): 65 ●Maximum suction force (kN): 1.31 ●Number of suction holes: 1 ●Air consumption (L/min): 30 ●Parallelism: 0.01mm/100mm ●Total height (mm): 65 ●Top and bottom polished finish ●There is a mounting groove on the side of the main body, so please secure it with the separately sold solid clamps: SC1400 (M14), SC1600 (M16), or SC1800 (M18) Set contents/accessories: ●Neolon (approximately 2 laps) ●Silicone rubber (approximately 1 lap) ●Double-layer tube for one-touch pipe fittings (0.5 m) ●Couple with one-touch pipe fittings 1 pc. Note: ●If purchasing for parallel use, please contact us in advance and make the arrangements.