SURE Hot Air Processing Machine Plastic Jet Lightweight Type PJ-210A1 1 unit

Catalogue number: PJ-210A1 Features: ●Professional grade metal body. ●Use of DC motor and change in body structure make it lighter than the standard type (PJ-206A1). ●Power switch located at the rear of the handle, allowing switching with one hand Applications: ●Shrinking heat shrink tubing. ●Shrink film packaging. ●Deburring molded products. ●Removing adhesive stickers. ●Bending resin such as PVC pipes. ●Accelerating drying of paint such as thermosetting putty and bumper repair. ●Removing parts from circuit boards. ●Welding with PVC rods. ●Heat welding of PVC sheets. Specifications: ● Power supply (V): AC100 ● Power consumption (W): 600 ● Power cord length (m): 3 ● Hot air temperature (℃): 450 ● Air volume (［［M3］］/min): 0.125 ● Air speed (m/min): 400 ● Width (mm): 75 ● Depth (mm): 75 ● Height (mm): 189 ● Switch: Sliding 3-stage switching ● Length (mm): 207 ● Uses: Shrink packaging, heat Shrink tube, label peel off ● Total length (mm): 255 ● Hot air temperature: 450℃ (10mm from the tip) ● Air volume: 0.125［［M3］］/min ● Air speed: 400m/min ● Power supply (V): AC100 ● Power consumption (W): 600 ● Width (mm): 207 ● Height (mm): 189 ● Depth (mm): 75 ● Switch: 3-stage switching (hot air, blowing air, off) ● Weight: 595g Material/Finish: ● Main body case: SPCE + nickel plating ● Handle, case cover, filter case: ABS resin ● Heater: Ceramic bobbin + NCHW ● Fan: PP resin Set contents/Accessories: ● R-type stand, filter Caution: ● When turning off the power, set the power switch to "blow air" and allow the main body to cool for about 5 minutes. ● Turning the power switch to "off" immediately after work may significantly reduce the heater's lifespan or significantly accelerate damage to each part.