TRUSCO Wheel Brush Φ250X19.05(19)mm Hole Brass Plated Steel Wire Wire Diameter 0.35 TB-6381 1 pc

Catalog number: TB-6381 Features: ● The brush shape is disc-shaped, with bristles planted radially toward the outside. ● Machines and tools used: Double-headed grinders, bench grinders, etc. ● When pressing the workpiece (material to be polished) against the brush to polish it, use the appropriate pressure (pressure that only slightly touches the tip of the brush bristles). ● Please note that using excessive pressure will not only reduce the durability of the brush, but may also cause a serious accident. ● Basically, choose bristles that are as close as possible to the workpiece (material to be polished). ● When using the brush, be sure to wear protective gear (protective glasses, protective gloves, etc.) to prevent serious accidents. ● Applications: Polishing metal surfaces, deburring, cleaning, paint stripping, etc. ● Inspect the brush before use, and immediately discontinue use if any abnormalities are found in the brush or during use. Applications: ● Polishing metal surfaces, rust removal, deburring, paint stripping. Specifications: ●Outer diameter (mm): 250 ●Wire diameter (mm): 0.35 ●Thickness (mm): 25 ●Hole diameter (mm): 19.05 ●Bristle length (mm): 62 ●Maximum operating speed (rpm): 3600 ●Metal fitting diameter (mm): 126 ●Compatible with double-headed, bench and tabletop electric grinders ●Brass-plated steel wire 0.25mm Material/Finish: ●Metal fitting: Steel (zinc-plated iron material) ●Bristle material: Brass-plated steel wire Caution: ●Use at a maximum rotation speed of 3600 rpm or less. ●Always wear protective gear such as a hard hat and safety glasses when working. ●Use within the maximum operating speed range. ●If there is a 19.05 (19) mm hole in the center of the disc-shaped brush and there is a shaft of the same diameter on a tool or machine, it can be installed.