TRUSCO Wheel Brush Φ300X25.4(25)mm Hole Steel Wire Wire Diameter 0.3 TB-6392 1 pc

Catalog number: TB-6392 Features: ● The brush is disc-shaped, with bristles planted radially toward the outside. ● Machines and tools used: Double-headed grinders, bench grinders, etc. ● When pressing the workpiece (material to be polished) against the brush to polish it, use the appropriate pressure (pressure that only slightly touches the tip of the brush bristles). ● Please note that using excessive pressure will not only reduce the durability of the brush, but may also cause serious accidents. ● Basically, choose bristles that are as close as possible to the workpiece (material to be polished). ● When using, be sure to wear protective gear (protective glasses, protective gloves, etc.) to prevent serious accidents. ● Applications: Polishing, deburring, cleaning, paint stripping, etc. on metal surfaces. ● Inspect the brush before use, and immediately discontinue use if any abnormalities are found in the brush or during use. Applications: ● Deburring, polishing, cleaning, etc. on metal surfaces. Specifications: ●Outer diameter (mm): 300 ●Wire diameter (mm): 0.3 ●Thickness (mm): 32 ●Hole diameter (mm): 25.4 ●Bristle length (mm): 74.5 ●Maximum operating speed (rpm): 1800 ●Metal fitting diameter (mm): 151 ●Compatible with double-headed, bench and tabletop electric grinders ●Steel wire 0.3mm Material/Finish: ●Metal fitting: Steel (galvanized iron material) ●Bristle material: Steel wire Caution: ●Use at a maximum rotation speed of 1800 rpm or less. ●Always wear protective gear such as a hard hat and safety glasses when working. ●Use within the maximum operating speed range. ●The disc-shaped brush has a 25.4 (25) mm hole in the center and can be attached to tools, machines, etc. if they have a shaft of the same diameter.