ULVAC Three-phase 200-220V Swinging piston type dry vacuum pump DOP-120SY 1 unit

Catalog number: DOP-120SY Features: ● Dry type vacuum pump that does not use oil or water in the gas contact area. ● Large displacement and compact size. ● Can operate from atmospheric pressure. Applications: ● Vacuum suction transport for automatic machines, etc. ● Vacuum packaging, printing machines. ● Suction machine. ● Chip mounter. Specifications: ● Exhaust speed (L/min) 50/60Hz: 120/140 ● Ultimate pressure (Pa): 8.0 x 10 [to the power of 3] ● Intake port diameter (mm): Female thread Rc1/4 ● Power supply (V): Three-phase 200-220 ● Overall width (mm): 139.5 ● Overall length (mm): 255 ● Overall height (mm): 167 ● One-stage exhaust method ● CE self-declared product ● TUV certified product ● cTUVus certified product Caution: ● If the pump is stopped during load operation and then operated again immediately afterwards, it may not restart. In this case, return the inside of the pump to atmospheric pressure. ●Do not suck in corrosive gases, organic solvents, liquids, or condensable gases (such as water vapor). Also, make sure that no dirt or dust gets into the pump. ●The cup packing, which is the sliding material of the pump, wears out during operation and generates wear powder. In addition, the sliding material used is vulnerable to moisture, so if it is sucked in, wear will be accelerated and its lifespan will be shortened. Do not suck in moisture or condensable gases (such as water vapor). ●This pump is for indoor use only. Do not install it in a place where it will be exposed to rain or water, or outdoors. ●When fixing the pump to a device, be sure to attach anti-vibration rubber. The mounting screw size for the anti-vibration rubber is M6 x P1.0.