VESSEL Cushion Drill Set (for Metalworking) 14-piece set AMD14S AMD14S 1 S

Catalog number: AMD14S Features: ●14-piece set of cushion drills (for metalworking). ●Dramatically reduced core vibration allows for high-speed drilling. ●Good bite, no need for a punch (a marking to determine the center of the hole so that the tip of the drill does not escape). ●Used for φ3.0mm and above where it is most effective. ●High-hardness HSS (high-speed steel) maintains a sharp cutting edge. ●The cushion drill is integrated with a grooved drill shaft by pressing. ●To increase the bonding strength, φ1.8mm and above are further strengthened by adding two-sided cuts. ●The resin ring suppresses core vibration and rattling, achieving accurate drilling. ●The flute angle of the end drill is processed to be gentle from the tip to the base (shank side), so cutting chips are discharged smoothly and holes can be drilled at high speed. Applications: ●For drilling various holes in iron, light metals, synthetic resins, wood, etc., and for drilling pilot holes for tapping. Specifications: ●Set contents (mm): 1.5, 2.0, 2.5, 2.8, 3.0, 3.2, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0 ●Shank diameter (mm): 6.35 ●18V compatible ●6.35mm hexagonal shaft type ●X-shaped thinning (φ3.0mm or more) ●Main body weight (g): 416 ●Case included (149×106×37) Material/Finish: ●High-speed steel HSS (high speed steel) Set contents/Accessories: ●14-piece set of Φ1.5/2.0/2.5/2.8/3.0/3.2/3.5/4.0/4.5/5.0/5.5/6.0/6.5/7.0mm (Φ1.5-6.0 is AMD series, Φ6.5-7.0 is KMD series) Caution: ●Please check the correct application, size and usage before use. ●The drill will become hot immediately after drilling and may cause burns, so please be careful. ●Securely secure the workpiece and press the drill at a right angle to the workpiece. ●Do not use an impact driver to apply impact. ●Take care not to damage the drill or let cutting chips fly.