Catalog number: 220USB-1 Features: ●An electric ball grip driver equipped with a lithium-ion battery and motor. ●Quick tightening is done by the electric motor, and final tightening can be done with the same feeling as a manual screwdriver. ●Comes with a slide switch that allows you to operate forward and reverse with light force. ●High-speed rotation improves work efficiency. ●Aluminum sleeve chuck that can be used with double-headed and single-headed bits. ●Charging is easy with a USB terminal. ●Built-in high-brightness LED light that is useful even in dark work sites. ●It also has a delay specification that lights up for 5 seconds after use. Applications: ●Electrical and facility construction, panel assembly, equipment and device maintenance, automobile and motorcycle maintenance, DIY, etc. Specifications: ● Maximum tightening torque (N・m): 2 (electric) ● Body dimensions (mm): 140 ● No-load rotation speed (min［［の−１］］): 280 ● Voltage (V): 3.6 ● Rated current (A): 0.8 ● Chuck capacity (mm): 6.35 ● Overall length (mm): 140 ● Handle diameter (mm): 45 ● Shaft length (mm): 100 ● Cutting edge: ［［＋］］2 ● Durability torque (manual): 10N･m ● Applicable bits: Opposite side 6.35mm (single-headed and double-headed bits) ● Battery capacity: Li-Ion 3.6V 800mAh ● Charging time: Approximately 60 minutes ● Number of charges: Approximately 500 times ● Continuous use time: Approximately 40 minutes (unloaded) ● Number of screw tightening times: Approximately 200 times (M4×20mm) ● Sleeve: Opposite side 6.35mm, Aluminum sleeve chuck ● Charging method: USB charging (Micro USB-type B) Material/Finish: ● Body: ABS + elastomer, Bit: Special alloy steel Set contents/Accessories: ● Bit: [[+]]2 (100 mm) x 1 ● USB charging cable (1 m) Caution: ● Be sure to read the instruction manual. ● Be careful of short circuits and electric shocks when working with electricity. ● Overloading can cause screws to break or injuries. ● Keep out of reach of children when storing at home.
