VESSEL Electric Screwdriver VE-5000R Lever Type Output Torque: 0.6-2.5N・m VE-5000R 1 unit

Catalog number: VE-5000R Features: ●The grip is equipped with a gel pad that absorbs vibrations, making it easy to hold and less tiring. (Ergonomic design) ●No need to replace carbon brushes, so it is maintenance-free. ●Equipped with a tamper-proof sleeve to prevent incorrect adjustment. ●There is no connection connector on the main unit, and the power cord is integrated (2.5m). ●The speed of screw tightening work has increased by 20%. (Compared to VE-5000 and VE6000.) ●Uses a slotless brushless motor. ●Improved tightening accuracy, efficiency, and maintainability. Applications: ●Control of multiple models used simultaneously on assembly lines, linking with peripheral devices, etc. Specifications: ● Output torque (N・m): 0.6-2.5 ● No-load rotation speed (min-1): 1200 ● Compatible screws (mm) small screws: M3.0-4.0 ● Power cord length (m): 2.5 ● No-load rotation speed (min-1): 1200 ● Compatible screws (mm) tapping screws: 2.6-3.5 ● Power consumption (W): 120 ● Overall length (mm): 290 ● Bit diameter (mm): 6.35 ● Included bits: A14 +2×65...2 pieces ● Lever type ● Rated input: AC100V 50/60Hz 120W ● Included bits: A14 +2×65...2 pieces ● Torque adjustment ring: 16 levels x 8 scales Material/Finish: ● PC + Elastomer Set contents/accessories: ● Hanging ring: 1 pc. ● Tamper-proof sleeve: 1 pc. ● Locking screw (M3 x 3): 2 pcs. ● Hexagonal wrench (H1.5): 1 pc. ● 3P2P conversion adapter: 1 pc. ● Instruction manual Caution: ● Read the instruction manual carefully and make sure the wiring is correct before applying power. ● Do not use devices other than PLC (photocoupler input) to connect to the signal output line. ● Do not directly connect the + side of the power supply to the signal output line. ● This will result in no current limiting resistance and will damage the photocoupler. ● Do not directly connect relays/motors/lamps, etc. to the signal output line to drive them.