FRONT#101 Double-sided tape 0.4 x 19 x 30m 1 roll F-7200-001 1 roll

This product was developed for joining materials such as polyethylene and PTFE, which were previously difficult or impossible to join with conventional adhesives. It is completely water resistant and salt water resistant. For general use, it exhibits its best characteristics at temperatures between -10°C and +50°C. At 20°C (room temperature), the viscosity doubles after 72 hours. Its greatest feature is that it is made from a special synthetic resin and does not contain any solvents. Therefore, the bonded parts do not harden after use, and have a cushioning effect, so it is safe to bend. It has strong adhesive strength (bonding power) on any substrate, even on non-polar surfaces such as polyethylene and PTFE, and on rough surfaces such as plywood, concrete, and iron. There is no need for special treatment to improve adhesion, and since the adhesive strength (bonding power) is strong, only a small amount is used, making it extremely economical. Apply silicone liquid (or oil) to scissors, a knife, etc. and cut. When peeling, drip trichlene, benzine, etc. on it and roll it up to remove the remaining part. In cold weather, be careful to keep the tape warm, and you may need to warm it up while working. Remove any dust, oil, water, or other foreign matter from the surface of the substrate. Thickness: 0.4mm Width: 19mm Length: 30m roll Code number: F-7200-001