IEEE802.3af compliant PoE injector EIB-UG01-PF2 1 piece

This is an IEEE802.3af standard compliant PoE (Power over Ethernet) injector that can supply power to PoE-compatible devices via a LAN cable. You can easily install PoE-compatible devices such as wireless access points, IP phones, and network cameras even in places where there is no power source nearby. By using electrolytic capacitors and a metal case made by a Japanese manufacturer, the device is heat resistant up to 50°C, allowing it to operate stably even in harsh environments such as factories or near server racks. It can be wall mounted using the included wall mounting screws. By using the optional magnet (EHB-EX-MG4)*, it can be installed on metal surfaces such as rack walls. * Of the four magnets included, two are used with this product. The AC cable anti-slip band prevents the AC cable from being accidentally pulled out. In addition to the 3-year send-back warranty, optional send-back warranty extension and delivery warranty are also available, allowing for long-term operation with peace of mind. Number of ports: 2 ports (Data/Data+PoE) Connection method: 1000BASE-T, 100BASE-TX, 10BASE-T Network Type: IEEE802.3ab, IEEE802.3u, IEEE802.3 PoE specifications: 802.3af compliant Number of PoE ports: 1 port PoE power supply capacity: 15.4W (max) Operating environment conditions: Temperature: 0°C to 50°C, Humidity: 10% to 90% (no condensation) Storage environment conditions: Temperature: -20℃ to 70℃, Humidity: 5% to 90% (no condensation) Connector type: RJ-45 x 2 (pair of 2 input/output ports) Installation direction: None Cooling fan: None Housing material: Steel Color: Black Input voltage: AC100-240V 50/60Hz Power consumption (rated): 18.2W (maximum) External dimensions (width x depth x height): approx. 154 x 73.1 x 36 mm (main unit only) Weight: Approx. 410g (main unit only) Wall mounting hole: Yes Warranty period: 3 years Compliance with laws and regulations: Compliant with EU RoHS Directive Compliance standard: VCCI Class B Accessories: 1 dedicated AC power cable (3-pin, approx. 1.8m), 1 3-pin to 2-pin conversion adapter, 1 AC cable anti-slip band, 4 rubber feet, 2 wall mounting screws, 1 Safety Instructions sheet, 1 Setup Guide, 2 serial number stickers